Sandblasting fixes the feel of an aluminium surface with one number: the grit. 120 grit reads matte with visible tooth. 220 grit is fine and even. 320 grit comes close to silk, with very low reflection. Across that range 60-degree gloss lands between 2 and 10 GU and surface roughness between Ra 1.6 and 3.2 micrometres. Grit sets the baseline.
Finer is not better. Sand cast and die cast aluminium carry porosity and flow marks, and coarse to medium grit from 120 to 220 covers them; at 320 those defects come back into view. So choosing a grit is really choosing between hiding defects and getting a fine touch, and the two rarely come together. Appearance parts usually want the even matte of 320, and pay for it with fingerprints, which means a clear coat or an anodised seal on top.
When two samples from the same batch feel different, the grit is usually not the culprit. Air pressure and blast distance drift between runs. Our working window is 0.4 to 0.6 MPa at a distance of 100 to 150 mm.
Discussion
Start the conversation
Your voice can be the first to spark an engaging conversation.